Skip to main content

How to make sound output from external speaker bypass integrated speaker in IFP30/50 series?

Please connect an audio cable from the AUDIO OUT connector on the IFP30/50 to an external amplifier or active speaker with a power adapter.

How can I lock the front panel buttons on IFP5550/IFP6550/ IFP7550/IFP8650?

Applied model: 1. Americas: IFP**50 - Gen 1, IFP**50 - Gen 2, IFP**50 - Gen 3.  2. Asia Pacific & Africa: IFP**50, IFP**50-2, IFP**50-3. 3. Europe: IFP**50, IFP**50-2EP, IFP**50-3EP. . Please refer either method below:   You will need to set combination key to “ON” at Debug menuàOther Settingà Combination key.   Then the font panel but...

Is it possible to select different time zone for date

The default time zone is +8 which can be changed at the initial setting stage by Set up wizard of ViewBoard Launcher. It will be auto sync-up later with internet connection.

How to control IFP via RS232/LAN?

1. Use a RS232 crossover adapter (except: IFP34 series, IFP52-1C series, IFP110) for RS232 control. 2. Make sure to set the communication settings below correctly  3. If you connect from PC, please make sure the com port is correctly chosen.         4. It's recommended to vController to control the Viewboard by RS232.     Please r...

Can IFP7550 play 4K2K content?

Yes, IFP7550 can play 4K2K content.

What is the resolution of IFP7550 OSD menu?

The resolution of IFP7550 OSD menu is 1080P.

Why can't I sign into Google account even with internet connection?

Please manually set Date/Time to select correct time zone.

How can I replace the IFP50 series’ boot up image and animation?

Please find the instructions and requirements in the attached PDF. File URL:https://support.viewsonic.com/helpdesk/attachments/33039346408

How do I remote control IFP5550/6550/7550/8650-1 (Gen. 1) power on/off via SureMDM?

Please refer to attached file to create a power on/off run script to remote control IFP 50-1(Gen. 1)  ,power on/off. File URL:https://support.viewsonic.com/helpdesk/attachments/33012153643

Will units not on the same sub net will they still appear on vCastReceiver list?

No, it’s cross sub net network limitation and please input screen PIN-code for casting connection.

ViewBoard Support

General Questions Interactive Display Technical Documents

Contact Us

Contact Us directly if you’re unable to get the answers and solutions for your ViewSonic products.