Commercial DisplaySupport - ViewSonic Mongolia

How to get back to the dashboard while content is playing via vSignage?

There are two methods to get back to the dashboard. 1. Press up button on the remote control to go to the dashboard 2. Connected to a mouse, directly press and hold anyone of the corner area, after successfully triggering the countdown, the corner area will flash in reverse (as shown in the figure). It will exit after ten seconds.

ViewSonic CDE30 Series Power Save Modes: Which Mode Should I Use?

ViewSonic CDE30 Series power save modes: Which mode should i use? There are four Power Save modes to choose from and knowing which one to use depends on the application. For this scenario we will cover digital signage, information and monitoring systems and meeting rooms where always-on, wake up on active signal and fast boot time is a must...

How to upgrade the firmware on Stand type EPoster, EP5520/EP5520T, EP5540/EP5540T, EP5542/EP5542T?

1. Format the USB disk as FAT32. 2. Unzip the “MstarUpgrade_848.zip” and then copy the .bin file to the USB disk (FAT32) in the root directory. 3. In Android mode, press the Source menu button, then press INPUT 9 9 1 to open the Service Menu. 4. Select "Firmware Update" and press OK. 5. Select "Upgrade Main" and press OK. ...

How to find MAC address of EP5520/EP5520T/ EP5540 /EP5540T?

MAC address is available on a label outside the carton as below. If carton is not available, check it under Android system with details below. 1. Press HOME on RC and select Settings 2. Select Network 3. Select Ethernet 4. MAC address listed as below

How can I fix EP5520T into floor?

Please refer the attachment. Attachment URL:https://support.viewsonic.com/helpdesk/attachments/33010268005

Where to apply Sigange Manager and vSigange Weather API key

Apply web URL https://developer.worldweatheronline.com/api/pricing.aspx

How to check whether vSignage can sync with others players and see the campaign?

If you are unable to sync the contents, there may be a connection issue. To verify if the admin is sync with the player, there is a JSON API in vSignage. 1. First make sure your windows firewall setting has allow vSigange to access. 2. Please use this API to check if source player see any other players and campaign. Open the Chrome br...

EP5520/EP5520T vSignage cut-in S/N

Product Cut in S/N EP5520T phase-in from UVE173100001 EP5520 phase-in from T91173300001

How to disable vSignage SW in EP5520 /EP5520T/ EP5540/ EP5540T?

Please press the "MENU" button on the remote controller to enter the setting page and then set "vSigange" to “OFF”. .

How to customize an Android Boot Animation on CDExx10 series and CDM models?

1. Overview The "Android Boot Animation" is a script used to load PNG files when the device boots. It is contained within an uncompressed zip file called bootanimation.zip. 2. Inside the bootanimation.zip file The bootanimation.zip file contains: The image folder(s) (containing PNG images named by incremental numbers) The desc...