Ugrás a fő tartalomra

How to customize an Android Boot Animation on CDExx10 series and CDM models?

1. Overview The "Android Boot Animation" is a script used to load PNG files when the device boots. It is contained within an uncompressed zip file called bootanimation.zip. 2. Inside the bootanimation.zip file The bootanimation.zip file contains: The image folder(s) (containing PNG images named by incremental numbers) The desc...

The image is distorted from NMP-302w HDMI out, how can I do?

You can refer below steps to check the issue. 1. To reset the NMP-302w. 2. To replace the HDMI(extension) cable. If above steps can't solve the issue, it will be NMP-302w mainboard issue, you need to replace NMP-302w.

What are the communication settings to control IFP via RS232 and LAN commands?

RS232 Communication Setting  - Baud Rate Select: 9600bps (fixed) - Data bits: 8 bits (fixed) - Parity: None (fixed) - Stop Bits: 1(fixed)   LAN Communication Setting - Type: Ethernet  - Protocol: TCP/IP - Port: 5000 (fixed) - Cross subnet: No - Logon Credentials: No

What are the requirements or limitation on the using cables of Videowall?

Support HDMI Ver. 1.4b DVI cable can't exceed 5M, otherwise, a DVI extender is required HDMI cable can't exceed 5M, otherwise, a HDMI extender is required LAN Cable can't be used to carry video signal directly Signal cable for each display should be separated from each other, twists cables together is not allowed Device for signal transmi...

ViewSonic CDE30 Series Power Save Modes: Which Mode Should I Use?

ViewSonic CDE30 Series power save modes: Which mode should i use? There are four Power Save modes to choose from and knowing which one to use depends on the application. For this scenario we will cover digital signage, information and monitoring systems and meeting rooms where always-on, wake up on active signal and fast boot time is a must...

Does NMP-302w and NMP580-W support touch content?

NMP-302w and NMP580-W support EP5520T touch function, you can use these two models with EP5520T, then you will have touch function.

How can I fix EP5520T into floor?

Please refer the attachment. Attachment URL:https://support.viewsonic.com/helpdesk/attachments/33010268005

How can I add other widgets to the Signage manager software?

You can refer below steps to use other widgets.

How to install Signage Manager License with CDM4900R/ CDM4300R/ CDM5500R/ CDM5500T?

1. Download the attached license file. 2. Select the correct Time Zone.  3. Please follow the below procedures to install the Signage Manager license:    license URL:https://support.viewsonic.com/helpdesk/attachments/33040907670

How to check CDX series , videowall, model RS232 daisy chain working correctly

1. Is it correct of RS232 daisy chain cable ? 2. In OSD menu, General settings -> Eco mode please set to Normal. (If set to Low power standby, the unit can power OFF but can’t power ON) 3. The RS232 daisy chain cable is 2.4mm – 2.4mm

Kereskedelmi kijelző Támogatás

Digital Signage General Questions Presentation Display

Kapcsolatfelvétel

Kérjük, forduljon közvetlenül hozzánk, ha nem talál válaszokat és megoldásokat a ViewSonic termékeivel kapcsolatban.