Answer: The power cable can be ran through the back or bottom hole of the system control box, in order to connect power. Please click this link to see full location details.
Answer: The Receiving Card (aka Receiving Board) plays a part in supplementing LED Module signal connection. It is directly connected to the Transfer Board as shown in Diagram 1 below. Diagram 1: Receiving Card mounted onto Transfer Card Signal is taken from the Transfer Board and sent to the Receiving Card, thus distributing th...
Answer: The USB to RJ45 adapter needs to be independently purchased in order to connect the USB port to the motherboard. Cables should not be affixed too tight or have too much tension to avoid damage to USB cable and/or USB port
Proper tools are essential for precise alignment and preventing electronic damage. The list includes measurement instruments, power tools, and mandatory ESD protection. Steps: Prepare tools according to the following categories: Measurement & Alignment Self-leveling laser level. Stud sensor/finder (multi-depth/material). 4-vial...
Answer: The number of Ethernet and Power cable sets that need to be attached from the System Control Box to DVLED Display Cabinets will vary depending on Cabinet quantity. Please refer to this link to find the Cabinet quantity for the appropriate model.
The DVLED installation process has multiple steps and the guidelines are given to those who wish to receive training. Installation should be done by personnel who have received training. Please refer to the installation video for a brief installation demonstration. Please contact your regional office for DVLED training-related questions. ...
Power Consumption will vary by model. Please refer to the table below to see full power consumption details for the listed dvLED products: LDM108-121 Normal 1330W Max 1900W (White Pattern, Brightness 100%) ≈570W(256 Grey Pattern, Brightness 100%) LD135-151 Normal: 2030W Max 2900W (White Pattern, Brightness 100%) ≈870W(256 Grey Pa...
Flight case dimensions and weight will vary by model. Please refer to the table below for Flight Case dimensions and weight by dvLED product: LD108-121 LD135-151 LD163-181 LD216-251 Dimensions (W x D x H) 58” x 27” x 34” (1470 x 850 x 680 mm) 71” x 30” x 34” (1800 x 850 x 745 mm) 83” x 32” x 34” (2100 x 850 x ...
Answer: There may be damage to the LED module's circuitry. Please check for unlit LEDs and refer to the LED Acceptance Criteria to replace appropriately. Related link: "Do I have to wear the anti-static gloves when installing LED modules for the DVLED Display?"