You can click the setting icon to entry privacy setting. To select "No Need", then cloudy drive won't log out automatically.
1. Enter the Android Settings menu (use the settings button on the unit or press Menu on the remote); if you use the setting button on the unit you will need to click the icon below: 2. Then select Other Settings. 3. Select On or Off.
If you are experiencing difficulty waking up your Intel NUC computer while it is connected to the IFP50-2, please follow the steps below. Requirements: ● IFP50-2 Series Display ● Intel NUC (10th Gen) ● Intel NUC: Aptio V BIOS (Models after 2019) Instructions: 1. Power on the Intel NUC and tap F2 upon the boot splash screen. ...
We suggest refer to one of below cleaning methods. 1. Use the Side Tool Bar to clean all current processes. 2. Use vSweeper to clear memory and unwanted files. 3. Power off the Viewboard, then power it back on to clear all unnecessary data and close any running procedures. Note: Using Browser/Chromium to play 1080...
USB standards have strict physical signal limits. USB 2.0 has a maximum recommended length of 5 meters, while USB 3.0/3.2 is restricted to 2-3 meters. Exceeding these limits causes touch lag, disconnects, or device recognition failure. Technical Specifications: USB Version Data Rate Max Recommended Length Typical Usage USB 2.0 480 Mbp...
1. Purchase the product key online or via Microsoft distributor. 2. Once you have the key, click “Start > Settings > Update & security > Activation > Change the product key”, then enter the new product key then click Next to Activate.
Step 1: Confirm correct input source on the ViewBoard (IFP) Press the [Input Source] button on the IFP remote or touch menu. Select the matching input (e.g., HDMI1 / USB-C / VGA). Wait 5–10 seconds for the screen to detect input. Step 2: Check your cable and connection type Try another HDMI, USB-C, or VGA cable. If using USB-C...
Please refer to the attached PDF. URL:https://support.viewsonic.com/helpdesk/attachments/33046905099
ViewBoard 2.1 will automatically be activated when PC/laptop connects to IFP50/70 with an USB touch cable or please purchase a key to get it activated permanently.
The LAN Communication Setting for IFP8650 is shown below.